I bought two sets of Yocto
I got two different motherboards
I have a question for the power section
Electrolytic capacitors are variously described in both PCB
which version is correct
Andrzej
https://www.dropbox.com/sh/8g264kcaknyp ... sa2Ja?dl=0
old motherboard
This is not funny
sell old PCB holes do not match sequencer switches
silkscreen on the pcb is with errors
This is a new company policy ??
Ps.when purchased two sets
I received two different motherboards
Andrzej
sell old PCB holes do not match sequencer switches
silkscreen on the pcb is with errors
This is a new company policy ??
Ps.when purchased two sets
I received two different motherboards
Andrzej
And both are revision V1.0??
both version 1.0
the other section clap
bad descriptions in power
small holes of switches sequencer
Now I have to grind leg of switches
I wonder why there are two different sold pcb
This is my sixth yocto, has never been the problem
I first got the PCB
the other section clap
bad descriptions in power
small holes of switches sequencer
Now I have to grind leg of switches
I wonder why there are two different sold pcb
This is my sixth yocto, has never been the problem
I first got the PCB
Last edited by fatum on Mar 5th, '15, 17:18, edited 1 time in total.
That really sucks.
I would shoot Vincent a mail about this instead of starting the build.
I noticed the difference in layout for the handclap but i can't tell you what else is different.
Good luck and keep us updated please.
I would shoot Vincent a mail about this instead of starting the build.
I noticed the difference in layout for the handclap but i can't tell you what else is different.
Good luck and keep us updated please.
Rimshot should be C113
and on this pcb is C241
number is not in the Section
and on this pcb is C241
number is not in the Section
Very frustrating...
1 photo of the old board
photo 2 and 3 of the new PCB
photo 2 and 3 of the new PCB
Last edited by fatum on Apr 24th, '15, 09:11, edited 1 time in total.
-
e-licktronic Site Admin - Posts 519
- Joined: Feb 16th, '11, 13:36
We are very sorry for this mistake. we had to deliver you a prototype board when ordering a b-stock Board.fatum wrote:This is not funny
sell old PCB holes do not match sequencer switches
silkscreen on the pcb is with errors
This is a new company policy ??
Ps.when purchased two sets
I received two different motherboards
Andrzej
I hope that the solution to this problem is right for you.
Best regards,
e-licktronic
Best regards,
e-licktronic
e-licktronic
Thank you for your response
I'm waiting for the shipment
Andrzej
I'm waiting for the shipment
Andrzej