I ve checked all the components, and their orientation.
C3 is 680/50 instead os 680/35 I read on the forum it was ok.
I use a netgear adapter which reads 15VAC 1A.
When I measure ACV between GND and 15V I get 31.4 and between GND and 5V I read 10.4.
I used two different multimeters.
If I plug 12VAC I get something like 25V as well
What can I do ?
30V on power board
ok
it's DC coming out, not AC so I got exactly 15.4 and 5.1 and 14.7
everything is fine
LOL
Had the same issue hahaha i was totally fixed on the ac because of the ac psu
Had the same issue hahaha i was totally fixed on the ac because of the ac psu