Cherry switch led orientation

Discuss Nava construction and related issues
  • User avatar
    KlangGenerator
    Posts 373
    Joined: Aug 8th, '16, 16:36

    It's wrong in the build guide. Anode = + = long leg.
  • serum114
    Posts 188
    Joined: Mar 6th, '17, 18:18

    Well thats a serious oversight. I knew i should have gone with my gut and followed the silk screen!!
  • User avatar
    KlangGenerator
    Posts 373
    Joined: Aug 8th, '16, 16:36

    This was already discussed here some time ago, but the pic in the build guide was never changed...
  • serum114
    Posts 188
    Joined: Mar 6th, '17, 18:18

    That's seriously stupid! Almost as much as where it says "respect the orientation" above the picture. Gutted, guess i have some desoldering to do.

    Thanks for clearing that up
  • serum114
    Posts 188
    Joined: Mar 6th, '17, 18:18

    I have just received an email from Vincent who has confirmed the build guide is currently wrong. Long leg is +/anode and MUST match silkscreen.

    Now to desolder 19 leds!!
  • User avatar
    e-licktronic Site Admin
    Posts 519
    Joined: Feb 16th, '11, 13:36

    serum114 wrote:I have just received an email from Vincent who has confirmed the build guide is currently wrong. Long leg is +/anode and MUST match silkscreen.

    Now to desolder 19 leds!!
    Nava building guide corrected now ;)
    Best regards,
    e-licktronic
    • Post Reply

    Return to “Nava Hardware”