Unoffical Firmware Available
-
zero progress, sorry.. I'll be the first to announce it here.Get the latest unofficial Yocto V1 firmware here.
Be sure to check the revised manual.
Leave your comments in this thread.
Ok - we'll wait for a great announcement whenever possible!rv0 wrote:zero progress, sorry.. I'll be the first to announce it here.
![Smile :-)](./images/smilies/icon_e_smile.gif)
If you need some beta-testers, I guess there could be some (just ask - I could spare some time as well).
Thanks,
F.
Hi all!
Has there been any update on the "rotate" function?
Thanks,
F.
Has there been any update on the "rotate" function?
Thanks,
F.
I'm in the same camp as others here that have the originally provided firmware and can't seem to update it.
What I know so far:
- Position of the pattern switch is irrelevant.
- Swapping multiple Computers, cables, and Interfaces didn't solve the issue.
- In INIT and pressing the reset key, I get the two quick bd hits. Pretty sure that is v2.0 the original project OS (confusing numbering IMO)
- Sync works properly still from my MPC2kXL
- attempting to update on Edit, slower speeds seem to hold the unit but not show progress (Even at 25% transmit speed)
- attempting at faster speeds just time out mid transmit and the unti goes to patter switch function
- no indication of lights shown from Pui's video linked here: https://youtu.be/3g_ZrjYXHH4
Since it boots, I'm thinking that its not a lack of boot-loader. Maybe not a good version of it. Would attempting to load via a ICSP cable and the hex file be the better next step?
What I know so far:
- Position of the pattern switch is irrelevant.
- Swapping multiple Computers, cables, and Interfaces didn't solve the issue.
- In INIT and pressing the reset key, I get the two quick bd hits. Pretty sure that is v2.0 the original project OS (confusing numbering IMO)
- Sync works properly still from my MPC2kXL
- attempting to update on Edit, slower speeds seem to hold the unit but not show progress (Even at 25% transmit speed)
- attempting at faster speeds just time out mid transmit and the unti goes to patter switch function
- no indication of lights shown from Pui's video linked here: https://youtu.be/3g_ZrjYXHH4
Since it boots, I'm thinking that its not a lack of boot-loader. Maybe not a good version of it. Would attempting to load via a ICSP cable and the hex file be the better next step?
hey folks,
sorry if this has already been asked but can yocto transfer midi notes into the daw with its sequencer?
i think ive got one of the last updates (2021) but it doesnt seem to work![Sad :(](./images/smilies/icon_e_sad.gif)
would really appreciate if someone could point me in the direction,
many thanks
g
sorry if this has already been asked but can yocto transfer midi notes into the daw with its sequencer?
i think ive got one of the last updates (2021) but it doesnt seem to work
![Sad :(](./images/smilies/icon_e_sad.gif)
would really appreciate if someone could point me in the direction,
many thanks
g
Hi all.
I'm back using my studio now and I wonder if there's been any progress here. I see the latest firmware version is 1.2c - how may I check on my Yocto if I got this already installed?
Thanks,
F.
I'm back using my studio now and I wonder if there's been any progress here. I see the latest firmware version is 1.2c - how may I check on my Yocto if I got this already installed?
Thanks,
F.
Hi all.
Most probably no updates on Yocto firmware, I guess?!
F.
Most probably no updates on Yocto firmware, I guess?!
F.