Hello there,
A friend of mine passed away and left me his Nava. We had already used it several times and it was working fine, except the accent. PSU was lost so I bought a new one which I think is OK.
Sequencer is running, all seems fine but I got no sound at all except "clicks" corresponding to my step trigs when I put my mixer's gain at a very high level. Same behaviour on the master and individual outs. No mutes, volume is OK...
I plan to install the SH Mux Boards for accent improvement.
Firmware is 1.028.
I'm not a DIYer and have not much skills with soldering, schematics and components.
Maybe I'm missing something?
Recording of that clicks corresponding to step trigs:
https://www19.zippyshare.com/v/lihtkBSF/file.html
PSU:
https://i.ibb.co/86rm6nS/153231774-2585 ... 6445-n.jpg
I also noticed that the potentiometers weren't soldered:
https://i.ibb.co/n1VfRbg/153100400-1457 ... 8662-n.jpg
https://i.ibb.co/rbHDVtr/154061801-1145 ... 9747-n.jpg
The Nava:
https://i.ibb.co/0GHwngF/152730700-2772 ... 2819-n.jpg
Thank you!
Nava sound issues
That is not the correct PSU. The one you have is 15V AC/DC. What you need is 15V AC/AC. Start by changing that and then see what it sounds like first.
Wow I haven't noticed that, my bad, I've just bought a new one, I'll let you know! Thank you!
Hello, the problem was the PSU, all is working except accent. My Nava is 1.02 board, is that normal that I haven't got any accent at all given that I don't have the SH Mux boards (yet)?
I noticed another problem with the master output:
Drums are a little overdriven with a strange behaviour on the clap sometimes, like a phaser, etc. I removed R469 and R470 but same issue.
With individual outs, drums are perfect, really deep.
Kick on master:
https://www106.zippyshare.com/v/Z6mWm0nj/file.html
Kick on individual:
https://www106.zippyshare.com/v/mcyXO0jt/file.html
You can clearly hear the difference.
And different waveforms:
Kick https://i.ibb.co/ctfVhPG/kick-nava.png
Snare https://i.ibb.co/3SF4gbW/snare-nava.png
LT https://i.ibb.co/NC5CKpX/LT-nava.png
etc...
Thanks.
I noticed another problem with the master output:
Drums are a little overdriven with a strange behaviour on the clap sometimes, like a phaser, etc. I removed R469 and R470 but same issue.
With individual outs, drums are perfect, really deep.
Kick on master:
https://www106.zippyshare.com/v/Z6mWm0nj/file.html
Kick on individual:
https://www106.zippyshare.com/v/mcyXO0jt/file.html
You can clearly hear the difference.
And different waveforms:
Kick https://i.ibb.co/ctfVhPG/kick-nava.png
Snare https://i.ibb.co/3SF4gbW/snare-nava.png
LT https://i.ibb.co/NC5CKpX/LT-nava.png
etc...
Thanks.
I think I maybe having the same issue.
Here's a capture of my Kick Drum waveform from my oscilloscope.
https://i.imgur.com/tGuJNWO.jpg
Doesn't look right at all!
Any ideas?
Here's a capture of my Kick Drum waveform from my oscilloscope.
https://i.imgur.com/tGuJNWO.jpg
Doesn't look right at all!
Any ideas?