12 motorized fader using the arduino platform

Everything about e-licktronic boards compatible with Arduino (schematics, dimensions...)

12 motorized fader using the arduino platform

Postby The Scientist » May 7th, '14, 20:42

I want to make a 12 motorized fader using the arduino platform to run the motors using the "ATA6836C" Hex Half-bridge Driver wit
h Serial Input Control to run the motors . with say 4 banks bank 1 = 1 to 12 , bank 2 =13 to 25 and remember the fader positions

http://www.atmel.com/Images/Atmel-4952- ... asheet.pdf

similar http://midibox.org/forums/topic/15004-u ... ng-module/

can any one give an example how to do this ?
The Scientist
 
Posts: 1
Joined: May 7th, '14, 19:49
Location: LA

Re: 12 motorized fader using the arduino platform

Postby e-licktronic » May 10th, '14, 07:24

Dear Thescientist,

First you need to code functions to interface with ATA6836C. It is a bidirectional serial connection . You can use ShiftIn() and ShiftOut() function to send a receive byte.
I can't test it because i didn't have this component.

Best regards,
e-licktronic
Best regards,
e-licktronic
User avatar
e-licktronic
Site Admin
 
Posts: 563
Joined: Feb 16th, '11, 13:36


Return to Hardware

Who is online

Users browsing this forum: No registered users and 3 guests