• MT PCB silkscreen

TR909 clone nava

  • MT parts list

TR909 nava clone MidTom

Let's continue with the midtom section. First add resistors. Do not pay attention of resistors type on the picture you certainly have different resistors.

nava tr 909 clone midtom resistors

Add film capacitors. On v1.02 mainboard C164 has been removed

nava tr 909 clone midtom caps

Add electrolytic capacitors. Electrolytic capacitors are polarized, the long leg of the capacitors is the positive. Pay attention toorientation in which yousolder electrolytic capacitors. The black part on the silkscreened electrolytic capacitor symbol is negative.

nava tr 909 clone midtom electrolytic caps

Add diodes. Diodes are polarized, the black ring must match the symbol silkscreened on the PCB. D34 is a 1N4746 this is the only one, take care !

nava tr 909 clone midtom diodes

Now, add transistors. Pay attention! There are two different type of transistor: 2SA1115 and 2SC2603. Do not mix !

nava tr 909 clone midtom transistors

Now, check midtom section power voltages and add ICs. Do not overheat ICs pins during solder process!

nava tr 909 clone midtom ICs

Finally, add potentiometers. Pay attention to potentiometers value they are all different. Then midtom section is finished, let's go to the hitom section.

nava tr 909 clone midtom pots