e-licktronic Forum

Edit: everything is working except crash, handclap, hi-tom now...

jonnem wrote:
Where do i start looking for errors?

Vincent?

Regards/jonnem

First check all power supply values on each section.
Do you use jumper or 0 ohm resistor for the RP resistors ?

Best regards,
e-licktronic

e-licktronic wrote:

jonnem wrote:
Where do i start looking for errors?

Vincent?

Regards/jonnem

First check all power supply values on each section.
Do you use jumper or 0 ohm resistor for the RP resistors ?

Best regards,
e-licktronic

All power supply values are correct on all 3 instruments.

Yes, i use 0 ohm resistors for the RPresistors on all instruments.

This is what my hi-tom sounds like, and if you listen carefully you can hear it all the time even when its not triggered. I'm moving the pitchpot without triggering it in the the end of the soundexample.

https://soundcloud.com/ennoi/hitom

Vincent/e-licktronic on holiday?

I could really use som help here...

Take a scope and measure...
Envelopes, vca, opamp in/outs

jonnem , how is your build going? Have you solved your problem yet?