Page 1 of 1
Latest BOM, Capacitor Voltage values differs?
Posted: Apr 19th, '16, 13:43
by drifter7508
Just started out with the first section.
C3 spec. 680 / 35 Volt
included in BOM 680 / 25 Volt... is this really OK?
C16, C18, C20 spec. 100uF/ 10V
included in BOM 100uF/ 6.3V. (8 qty included)
OK or error?
Re: Latest BOM, Capicator Voltage values differs?
Posted: Apr 19th, '16, 14:26
by BedroomMusic
100uF/ 6.3V are Ok
Re: Latest BOM, Capicator Voltage values differs?
Posted: Apr 19th, '16, 14:28
by BedroomMusic
the Power Supply part number C3 is electrolytuc capascitor 680/ 35 V on mouser bom what i order is 680 / 25 volts is this ok?
Yes it is
Best regards,
e-licktronic
i ask the same question
Re: Latest BOM, Capicator Voltage values differs?
Posted: Apr 19th, '16, 14:29
by BedroomMusic
dig in the forum you can find everything
Re: Latest BOM, Capicator Voltage values differs?
Posted: Apr 19th, '16, 14:34
by drifter7508
Thanks for fast replies!
(I spent hours reading most threads)
Re: Latest BOM, Capacitor Voltage values differs?
Posted: Nov 25th, '16, 22:58
by fomtoberheim
on the PCB c16-c18-c20 are not polar while the capacitors are. does it matter what the orientation is then?