Re: Nava
Posted: May 18th, '16, 04:15
Look in Projects and Nava on the webpage. There ar buildinstructions with a clear description on which part goes where.
Just finished my kick and really wanted to hear it too. I was able to listen to it the way you described. I used the +5v pin on the power header to trigger. I used a temporary wire and had to tap the on the trig pin really quickly to imitate a pulse. Only 9 more instruments to go!AonFluX wrote:I would like to try the different sounds as I progress in my build.
So, now Im almost done with the bassdrum - can I trig the sound directly on the point that is marked Trig on the PCB? and what voltage should I use (+5v?) And can I monitor the output from that section directly? I mean can I connect a line or headphone directly to the bassdrum output (J1-1)?
Thanks!
Yes, I did this aswell, trigger with a wire connected to +5v, but it was hard to perform a short pulse, så sometimes it sounded a little wierdFactoryDefault wrote:Just finished my kick and really wanted to hear it too. I was able to listen to it the way you described. I used the +5v pin on the power header to trigger. I used a temporary wire and had to tap the on the trig pin really quickly to imitate a pulse. Only 9 more instruments to go!AonFluX wrote:I would like to try the different sounds as I progress in my build.
So, now Im almost done with the bassdrum - can I trig the sound directly on the point that is marked Trig on the PCB? and what voltage should I use (+5v?) And can I monitor the output from that section directly? I mean can I connect a line or headphone directly to the bassdrum output (J1-1)?
Thanks!
Yes, wonderful idea, finally Im getting some use for my arduinosjeroenbvo wrote:To trigger the individual instruments you need a 1ms 5V pulse. you can do this with an arduino and some script.
See this topic at the Yocto forum
viewtopic.php?f=16&t=179#p701
Anyway, a lot of issues you may encounter building the Nava we probably had with the Yocto too, so search that forum as it is a treasure of info.
Cheers, Jeroen
Do you also need to connect acc to +5V on the Nava in order to check the different sounds as the are getting built?jeroenbvo wrote:To trigger the individual instruments you need a 1ms 5V pulse. you can do this with an arduino and some script.
See this topic at the Yocto forum
viewtopic.php?f=16&t=179#p701
Anyway, a lot of issues you may encounter building the Nava we probably had with the Yocto too, so search that forum as it is a treasure of info.
Cheers, Jeroen
Yes you do.AonFluX wrote:Do you also need to connect acc to +5V on the Nava in order to check the different sounds as the are getting built?jeroenbvo wrote:To trigger the individual instruments you need a 1ms 5V pulse. you can do this with an arduino and some script.
See this topic at the Yocto forum
viewtopic.php?f=16&t=179#p701
Anyway, a lot of issues you may encounter building the Nava we probably had with the Yocto too, so search that forum as it is a treasure of info.
Cheers, Jeroen