Page 1 of 1
Yocto EXPANDER mode problem
Posted: Feb 6th, '16, 11:56
by kacperpawluk
Hi! Last time i used Yocto in expander mode and I saw that volume then is louder than in normal mode. Maybe someone had the same problem?
Re: Yocto EXPANDER mode problem
Posted: Feb 8th, '16, 10:06
by bmaximus
Hi Kacper, I've tried it with a Roland SPD-8. Everything works properly: latency, velocity. It could be a problem with the interpretation of the velocity with your controller. Try it with another instrument...
Re: Yocto EXPANDER mode problem
Posted: Feb 8th, '16, 10:30
by kacperpawluk
I think there is for sure problem with Yocto because on other instruments this works OK. Even with velocity on 1 Yocto is louder in Expander mode.
Re: Yocto EXPANDER mode problem
Posted: Feb 8th, '16, 19:55
by medbot
Is your accent level up? I've noticed when using my MPC to control the Yocto in expander mode that the accent is what controls the velocity sensitivity, and if it is up all the way and if you are sending max velocity signals, everything will be louder because it's got full accent on every note.
Re: Yocto EXPANDER mode problem
Posted: Feb 8th, '16, 22:57
by kacperpawluk
I noticed that but accent knob is set on 0 and Expander mode is still louder than normal mode.