e-licktronic Forum

I bought two sets of Yocto
I got two different motherboards
I have a question for the power section
Electrolytic capacitors are variously described in both PCB
which version is correct

Andrzej

https://www.dropbox.com/sh/8g264kcaknyp ... sa2Ja?dl=0

This is not funny
sell old PCB holes do not match sequencer switches
silkscreen on the pcb is with errors
This is a new company policy ??


Ps.when purchased two sets
I received two different motherboards


Andrzej

And both are revision V1.0??

both version 1.0
the other section clap
bad descriptions in power
small holes of switches sequencer
Now I have to grind leg of switches

I wonder why there are two different sold pcb

This is my sixth yocto, has never been the problem
I first got the PCB

That really sucks.
I would shoot Vincent a mail about this instead of starting the build.
I noticed the difference in layout for the handclap but i can't tell you what else is different.
Good luck and keep us updated please.

Rimshot should be C113
and on this pcb is C241
number is not in the Section

Very frustrating...

1 photo of the old board
photo 2 and 3 of the new PCB

fatum wrote:This is not funny
sell old PCB holes do not match sequencer switches
silkscreen on the pcb is with errors
This is a new company policy ??


Ps.when purchased two sets
I received two different motherboards


Andrzej

We are very sorry for this mistake. we had to deliver you a prototype board when ordering a b-stock Board.
I hope that the solution to this problem is right for you.

Best regards,
e-licktronic

Thank you for your response
I'm waiting for the shipment

Andrzej