e-licktronic Forum

I have a wonderful Nava Extra 9 built by my good friend Klang Generator.
I bought one ALLEN&HEATH Zed 436 and I use it as an audio interface on my Mac and
DAW Cubase.
My question: some of you have used an interface/converter MIDI to USB in the Nava Extra9?Thank you all.

Roland UM-ONE mk2 is the best in the world for you NAVA Extra9.
This fabulous MIDI to USB converter is wonderful and it works great with a Mac 5.1 with Cubase.
It works very well for me.

Come see my humble page:

https://www.facebook.com/nava.extra9/

I have finished assemble Nava, and I tried to update firmware because my Nava firmware is 1.017.
however, its still 1.017, it seems Nava firmware is not updated.

I have only mac, so I used 'sysex librarian' and 'C6', interfaces I used are 'roland UA25' and 'RME fireface 400'
these are my procedures.
・turn on power with holding 1, 3 and 5 switches.
・send sysex data through midi in directory from my mac.
・waiting finish sending data. while sending data, Nava switch led blink up to 9 switch led.
・nava restarted, but lcd display Nava 1.017.

I tried 1.0.18, 1.019 and 1.020, and change sending speed to slow,
and changing softwares, and change interfaces .
however, it same state.

I confirmed 'mid in' operation, its works fine, Nava is synced with x0xb0x and ableton live.

anyone knows what is the cause of this problem? its bootloader issue?

regards.