e-licktronic Forum

Hello, I'm working on the Hand Clap section of the Nava v1.02 board and I'm getting the following voltages on IC29 for the AN6912. Are these voltages expected? Is anyone else getting something similar on their builds?

IC29 | AN6912
Pin01 = -14.60V
Pin02 = 0V
Pin03 = 0V
Pin04 = -15.15V
Pin05 = -10.12V
Pin06 = 0V
Pin07 = -5.054V
Pin08 = -5.054V
Pin09 = 0V
Pin10 = 0V
Pin11 = -13.75V
Pin12 = -15.19V (Circle Silkscreen)
Pin13 = -5.175V
Pin14 = 0V