e-licktronic Forum

so being that i cant get a straight answer from e-licktronics themselves about a product i purchased asking if there are any pcb issues i should look out for & need to know about to finish the build, its lead me to this forum to try & figure out if there are any known manufacturing bugs/fixes on the pcb’s i should know about before completing the build. any info or tips would be great!

Hi,

v1.02 had all pcb issues fixed as far as I know.
Myself, I have one of the first v1.0 boards, which had indeed some minor issues, but nothing deal breaking. I didn't even cut my pcb up. Only swapped some transistor collector/emitter pairs.

For the rest, I had a faulty 2sa798. Also that is survivable, after a failed ebay purchase obtaining some fakes (should have known better) I just made one with a matched pair.

See my post of 2 years ago: viewtopic.php?f=24&t=1478

Anyway, there is lots of resources here on the forum. It seems a bit dead currently, but there is plenty of history.

Good luck with your build.

Jeroen

awesome, thanks for the info! my main concern was if i needed to install the extra mux boards for the accents.