Page 1 of 1
sequencer pcb 1.02 IC (SOLVED)
Posted: Sep 25th, '18, 08:13
by undercover_l
Hi is it me or do all the IC's in the tutorial don't match with the IC's on board 1.02?
i'm having difficulties to following the tutorial and placing the right ic in the socket! all help would be appreciated.
Re: sequencer pcb 1.02 IC
Posted: Sep 25th, '18, 12:31
by serum114
All locations and parts are correct to the tutorial. The only differences, which are noted in the guide, are IC111 and IC114 which are the mux boards, also IC110 HAS been removed and replaced with IC1 - also releated to the MUX. Maybe try working with the BOM (downloadable from the Elick website) as this offers descriptions of the part which you can check against what you have if you're unsure.
Re: sequencer pcb 1.02 IC
Posted: Sep 25th, '18, 22:40
by undercover_l
sorry jumped to conclusions, all is fixed and my nava works
Re: sequencer pcb 1.02 IC
Posted: Sep 26th, '18, 10:18
by serum114
undercover_l wrote:sorry jumped to conclusions, all is fixed and my nava works
Hell yes!!