While I wait for a v1.0 kit to come available on the resale market (I am now the proud owner of a case), does anybody have a parts list for all of the buttons/switches/knobs? Were there any eagle files to have the PCBs made?
I see others posted here but if anybody has a kit that they want to sell, I'm not even looking for a good price, I'll pay a bad price. Thank you.
Waiting for ... (parts question)
The BOM is available on this forum although I don't think knobs are included...
The Eagle files for the main board are available although it isn't routed. But there is a second I/O board which I don't recall seeing Eagle files for. I think this is to keep people from just getting these manufactured
The Eagle files for the main board are available although it isn't routed. But there is a second I/O board which I don't recall seeing Eagle files for. I think this is to keep people from just getting these manufactured
I said knobs but I meant, pots, etc. all of the parts which were included in the original kits but not not he Mouser BOMs. Does anybody have a link to the Eagle file for the main board? Got start somewhere.
And thank you!
And thank you!
If you email Vincent, he may provide the potentiometer part numbers. If he does not, this will be a tricky one since the v1.0 kit is not in stock...
The Eagle BRD file of the mainboard without component routing is available at this page:
http://www.e-licktronic.com/en/content/ ... one-tr-808
You could use the measure command in Eagle and select a potentiometer based on lead spacing, mounting hole locations, etc. Complete Eagle files are not available.
The Eagle BRD file of the mainboard without component routing is available at this page:
http://www.e-licktronic.com/en/content/ ... one-tr-808
You could use the measure command in Eagle and select a potentiometer based on lead spacing, mounting hole locations, etc. Complete Eagle files are not available.