Hello!
Just finished building Yocto v1 and seems to be a logic problem.
To begin searching I need to understand the correspondence between Switch position and functions for the mode switch. I find no documentation regarding this.
So which funcion corresponds to Logic 0 (Switch position 1) on the encoder?
Also, any advice on where to start searching for this tempo-anomality is appreciated:
- Tempo is extremely low.
- Turning the encoder changes tempo ever so slightly, almost unnoticeable.
Mode Switch positions & tempo
I figured it out myself:
Logic 0 equals "Pttm" (and on instrument selector "AC").
By finding this out I could initialize EEprom and tempo seems fine.
Seems like my Yocto is fully funcional by the first attempt!
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Now I'll have to read the manual.
Logic 0 equals "Pttm" (and on instrument selector "AC").
By finding this out I could initialize EEprom and tempo seems fine.
Seems like my Yocto is fully funcional by the first attempt!
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Now I'll have to read the manual.