Page 1 of 1
Trig out - SH-101
Posted: Sep 26th, '17, 14:55
by serum114
Struggling to get the trigger out to work well with my 101 sequencer, "EXT CLK" input. It triggers but misses every few pulses.
My guess is the pulse is insufficient, not the voltage, but can anyone else confirm this and
is there a mod or is it a software issue?
Re: Trig out - SH-101
Posted: Oct 2nd, '17, 15:27
by serum114
Today I scoped the Nava Trig and a Boss DR110 Trig out.
The DR110 triggers my 101 clk without a problem where as when triggering my 101 from the Nava it misses the occasional trigger. the first things I've noticed is the DR110 is 6v and over 10ms long where the Nave is 5v and around 2.5ms.
Is there any component changes I could do make the trigger in my Nava more like the DR110? or is this a software issue?
Below are images from my scope set at 1v x 5ms
Nava
[resize=800]
https://image.ibb.co/iaZmkb/20171002_143303.jpg[/resize]
DR110
[resize=800]
https://image.ibb.co/b9zK5b/20171002_143139.jpg[/resize]
Re: Trig out - SH-101
Posted: Oct 8th, '17, 16:17
by SOM
just to let you know..
i have the same problem. My Nava doesn´t triggers my SH101... dont know why...
WIth my Yocto it works perfect.
Re: Trig out - SH-101
Posted: Nov 2nd, '17, 20:49
by peskado
Same problem with my Nava
Trigger pulse is short(
Re: Trig out - SH-101
Posted: Nov 3rd, '17, 02:27
by e-licktronic
peskado wrote:Same problem with my Nava
Trigger pulse is short(
Solved on the V1.024 firmware. Pulse period is now 10ms
Re: Trig out - SH-101
Posted: Nov 9th, '17, 21:24
by serum114
Awesome! Good work!
e-licktronic wrote:peskado wrote:Same problem with my Nava
Trigger pulse is short(
Solved on the V1.024 firmware. Pulse period is now 10ms
