e-licktronic Forum

Dear Diyer,

To complete your kit you need 27x 11mm Orange d-shaft knob, 1x 21mm black knob and 1x 21mm orange knob. A 15VAC 1000mA psu and a case available on [url=hhttp://www.e-licktronic.com/forum/viewtopic.php?f=27&t=1319]this topic[/url] or by Erica synth

Yocto² Mouser BOM update:

EDIT 04/14/2022:
Mouser Bom complete
Missing part can be found here:
-5 pins DIN connector (4 pcs needed)
-4PDT Slide switch (4 pcs needed)
-2Mbits EEPROM (2 pcs needed)

EDIT 09/04/2019:
-Rectron 1N4148 diodes replace by On semiconductor
-Yageo MFR-25FTE52-1M Resistor replace by Xicon
-QYX2A563KTP obsolete replace by Kemet
BOM updated no back order components

EDIT 11/19/2018:
-MFR-25FBF52-220R replace by 271-220-RC
- KCDX-5S-N replace by KCDX-5S-N2
-QYX2A562KTP replace by R82MC1560AA50M
-QYX1H102KTP replace by QYX2A102KTP
BOM updated no back order components



EDIT 07/16/2018:
-MC7815CTG replace by SCD7815CTG
- MFR-25FTE52-6K8 replace by 271-6.8K-RC
- MFR-25FBF52-470R replace by 271-470-RC
- K104K15X7RF53H5 replace by FG28X7R1H104KNT06
-QYX1H682JTP replace by QYX1H682KTP
-QYX2A822KTP replace by F612JF822J100C
- QYX1H123KTP replace by MMK5123K50J01L4BULK
All components are in stock

EDIT 02/06/2018:
-BOM Updated
All components are in stock

EDIT 12/14/2017:
- UPS1E222MHD replaced by ESH228M025AM7AA
- 69190-403 replaced by 78511-403HLF
-CD4049UBEE4 still out of stock by you can find it here or here or here or here

EDIT 10/23/2017:
-QYX1H222JTP replaced by QYX2A222KTP
-QYX2A332JTP replaced by QYX2A332KTP
-QYX2A473KTP replaced by QYX1H473KTP
-1uF 50V Wurth capacitor changed reference
-6N139M replaced by 6N138
-MSS4200 switches still of out stock but you can find it by Ebay , Digikey or Farnell
BOM updated

EDIT 09/5/2017:
-MSS4200 switches still of out stock but you can find it by Ebay , Digikey or Farnell
-All others components are in stock

sweet thanks for the update. Cases by Kacper in the proposed thread seem to be unresponsive atm though, so i suggest double checking before ordering anything

Could you list the changes from the previous BOM? Mouser was having issues with a few of the parts when I ordered mine the other week but if everything's in stock now something must have changed?

I have a complete Mouser BOM component kit for sale if anyone is interested. Completely new in the box. All components included for the boards.
Selling basically because of lack of interest for the project now.

@ Analog8
Tried to contact me, me, I can not
Thanks

You still got the yocto BOM for sale?

So I've just built the cowbell and cymbal and can't get the tuning quite right. In the build guide for yocto 1 it mentions that there are extra parts in the BOM to compensate for that adjustment. Is that still the case with Yocto 2?

SH-303 wrote:Is that still the case with Yocto 2?

I think the solution is generic. There's a section in the 808 Service notes that recommends alternative resistor values, as well as a post on this forum. Masuto used trimmers on stripboard to fine-tune those values. That's a good approach. They're probably slightly different for each build.

I guess to be more clear, are there extra parts in the Yocto2 BOM to remedy this like the Yocto BOM?

Hi,

for the Yocto^2 I need the 538-22-23-2081 and the 506-MSS420004 switch. Where can I get the first one?

Cheers Ingo