e-licktronic Forum

Hey I'm finally getting around to starting my 1.0 kit build and noticed there is a 1.01 now.
What's the hardware bug?
Are there instructions on how to modify the 1.0 kit build to be bug free?

I'm pretty sure all the bugs for V1 are identified in the build guide. Check kick drum and snare drum guides, there is links to the topic pages in the forum. I'll add that i built the latest rev.

It would be super nice if they were all compiled somewhere easy like the top of a pinned post by the makers of this kit...

So far I found this transistor leg thing in the snare section
viewtopic.php?f=24&t=970&hilit=snare+q43&start=40#p5823

And couldn't find anything in the kick build page
http://www.e-licktronic.com/en/content/ ... e-bassdrum

Read just below the parts list in red

Hi! Can anyone help me with this?
To solve the bassdrum issue (I have a V1.01 Nava) it tells me to:

For the V1.01 owner connect a wire between P1 and P1'

Where do I find that on the board? What does P1 or P1' refer to?

Thanks in advance!

These are two solder pads in the bd circuit. Just connect a wire between them