Well guess what I picked up at the post office today?
That's right, my Yocto2 case. I had a letter from the post office posted to me on Friday stating I had a package to pick up!
To my surprise it was from Poland.
The box was all ripped up and broken and I feared the worst.
I was lucky, the case was fine. It actually looks very nice!!
Sadly though I can't be botherex to complete this project so I will be selling it with all components from Mouser - the complete kit except for the circuit boards and psu and knobs.
If anyone is interested send me a PM. I'm only selling within Europe.
Re: YOCTO² enclosures - official thread
Posted: Oct 31st, '17, 06:49
by e-licktronic
It seems that Kacper sent all Nava and Yocto² enclosure. Look what i received this morning
So if you still get yours, be patient you will get it.
I still have not heard from Kacper. I hope you are fine guy
Re: YOCTO² enclosures - official thread
Posted: Oct 31st, '17, 12:26
by Analog8
Any one here want to buy my Yocto2 enclosure and mouser component kit?
Re: YOCTO² enclosures - official thread
Posted: Nov 1st, '17, 04:58
by richardh
I got mine today, but it seems that the holes on the PCB don't line up with the standoffs. Is this a problem others have found? Some of the standoffs are out 2mm which, short of filing the board, I can't think how to fix.
-Rich
Re: YOCTO² enclosures - official thread
Posted: Nov 1st, '17, 16:38
by e-licktronic
Mine match perfectly with PCB holes.
Try to bend this PCB header a little bit by user a long M3 screw.
Re: YOCTO² enclosures - official thread
Posted: Nov 2nd, '17, 12:22
by HexaLog
Hello,
Got my Enclosure last week !
Thanks Kacper !
Re: YOCTO² enclosures - official thread
Posted: Nov 2nd, '17, 16:30
by BedroomMusic
Hi in my enclosure two or three holes on the PCB don't line up with the standoffs and i used a small hammer and now is ok but easy with the hammer
holes for the 4 diodes on the top main board are to small i drill them with 3,5mm bit , space between main and power board is to small for the power jack and connectors , i desolder the power socker on the main board and solder to the small board and the wires to the main big board (opposite way like is in the instructions ) and now is ok
maybe you have the same problem ?
Little demo
Re: YOCTO² enclosures - official thread
Posted: Nov 7th, '17, 19:05
by orphic
Both my units arrived today. Kacper , thank you. And I hope everything is ok. Your work is excellent. Everyone should feel confident ordering cases from Kacper, maybe just dont be in a rush