e-licktronic Forum

The parts list in the build guide states its a .01uf but the picture shows a .047uF. Which is the correct part?

I think 0.01uF it's the right value for C163.

Thanks skope it's not clear in the build guid. It calls for 3x .01uf caps but gives you 4 positions to fit. But in the photos it shows a .047uf.

**EDIT**

.0047uf Is this the correct part

I went by the build guide and used .01uf cap for C66, C69, C79, and C163.

My snare sounds fine...i think..

According to the latest software version:

v1.023:
-Improved velocity on all instrument
You should replace C89 and C163 by 10nF (Build manual and Mouser BOM updated)

Thanks for the input !!