e-licktronic Forum

Freezing issues here as well.

If I don't press the start button within 10 seconds after boot, it freezes.

Currently using 1.018 firmware. Does .020 resolve such issues?

Simple workaround, but clearly this shouldn't be happening.

Using the Microchip 24LC1025.

I have encountered the same issue after upgrading 1.020, it happened 2 times where I had to re-initialize the eeprom to get back to normal, but it never happened again, so I'm still insure what causes the problem.

I’m experiencing the same freezing issue on 1.018 firmware. Pressing start quickly helps, but it’s inconvenient. Curious if updating to 0.20 actually fixes this or if it’s just a temporary workaround.