e-licktronic Forum

Hi,
I don't know where to post this so I'll use this thread. I'm looking forward to building the NAVA and then after that I wanna do the YOCTO. What confuses me is what should I buy ? The NAVA kit v1.0 worth 320EUR (http://www.e-licktronic.com/en/nava-par ... clone.html) is all I need to build the NAVA and then just separately buy a metal case? What do I need that mouser project link for ? Are there more components needed to complete the NAVA kit, if so, why its separated like that? Can someone inform me better and guide me what and why should I buy to start building my NAVA.

Looking forward to join this community soon fellas !


Cheers

Hi,

the nava kit from e-licktronic contains only the PCBs and the rare/uncommon parts, the generic parts like resistors and caps you'll get from mouser. and a case you have to get somewhere else too, just check the forums here.
and the 15V AC/AC adapter you have to get separately as well, just make sure its output is 15V AC and NOT 15V DC !

enjoy the ride

Data Jam wrote:Hi,

the nava kit from e-licktronic contains only the PCBs and the rare/uncommon parts, the generic parts like resistors and caps you'll get from mouser. and a case you have to get somewhere else too, just check the forums here.
and the 15V AC/AC adapter you have to get separately as well, just make sure its output is 15V AC and NOT 15V DC !

enjoy the ride

Thanks for that, now im grasping it. I already found some of the parts in local shops, mouser does not ship to my country