[SOLVED] Issue getting -15v in PSU section
Posted: Aug 24th, '16, 16:41
Edit to remove images/summarize issue.
Original text:
Original text:
Solution: You're likely as dumb as I am and have a 15VDC wallwart instead of 15VACHey guys - I'm having an issue getting -15v at J8-5 before connecting to the main board.
I've gone through the schematics and it seems like everything after D110 shows 0v. (C91, C49, REG2, D96, C93, C141, D94)
I went over each solder point to make sure everything had a good connection, checked diode and capacitor polarity. Could it be the regulator itself?
