Page 2 of 4
Re: C163 at SD
Posted: Sep 3rd, '16, 08:26
by drifter7508
All I know is that it now works when I changed back to 0,047uf.
Re: C163 at SD
Posted: Sep 3rd, '16, 08:44
by beeb
Your 0.47 might have been bad? Or bad solder joint?
Re: C163 at SD
Posted: Sep 3rd, '16, 09:06
by drifter7508
Maybe... but what difference will a 0,47uf make at c163? =)
The issues I had was that the seq would not play the snares programmed the first time. Only when accent was ( the higher level) was clicked in.
Snare worked fine when tapping in tap mode. (Not programmed though.)
Re: C163 at SD
Posted: Sep 8th, '16, 18:08
by amartins
Hi,
I can't find the film capacitor 0,47uF neither in the BOM nor in the order i made at mouser.
So what i've to do, buy a 0,47uF or put a 0,047uF?
Re: C163 at SD
Posted: Sep 18th, '16, 16:17
by Grizzlydj
in my nava 0,47 bad working - 0,047 good), i mixed emitter and collector
Re: C163 at SD
Posted: Sep 18th, '16, 16:25
by Data Jam
its working good on mine with swapped transistor legs, and 0.47uf (i did both changes at the same time never powered it up in between, don't think it matters, but thought i mention it anyways...)
Re: C163 at SD
Posted: Sep 18th, '16, 18:20
by zephyrin
I have also swapped the transistor legs and i have the 0.47uf but i found that the sound is not good for me
Do you have the same with your Snare Drum ?
Re: C163 at SD
Posted: Sep 18th, '16, 18:30
by Grizzlydj
when it was 0.47 and I programmed sequencer that there was no sound or sound very slow if I did not use the accent or tap mode. it is difficult to explain but probably because of the greater capacitance needed more time to start operate , the sound appears only if I put the accent , or many consecutive strikes. everything worked exactly when the capacitor is charged as well as with 0,047 ... I have read that someone else has the exact same problem. I returned 0.047 and now everything is fine ) drifter7508 it seems to say about the same problem
Re: C163 at SD
Posted: Sep 18th, '16, 18:39
by Grizzlydj
drifter7508 wrote:Maybe... but what difference will a 0,47uf make at c163? =)
The issues I had was that the seq would not play the snares programmed the first time. Only when accent was ( the higher level) was clicked in.
Snare worked fine when tapping in tap mode. (Not programmed though.)
exactly the same problem)) don't use 0.47
Re: C163 at SD
Posted: Sep 18th, '16, 19:08
by Grizzlydj
zephyrin wrote:I have also swapped the transistor legs and i have the 0.47uf but i found that the sound is not good for me
Do you have the same with your Snare Drum ?
not exactly, but if in tap mode sound bad - the problem is not in c163, I think ... in any case worth a try 0.047