e-licktronic Forum

But as to soldering to the "housing", then no. You solder the wire to the crimp, and you plug the crimp into the housing until it clicks

Am I right in counting 22 wires http://www.e-licktronic.com/en/content/ ... e-io-board

I've got 25 plus the insulated wires for the Master section, which will come out to 6 individual wires, 2 ground, 2 left and 2 right

5 for main power and ground
8 for J14
4 for J13
4 for J12
4 for J11