e-licktronic Forum

I'm volunteering to manage a git repo on bitbucket f.i.

Dear Diyer,

Here are the Yocto Arduino code and libraries. You need to use Arduino IDE and change buffer length in Wire library to 128 (in the both file twi.h and wire.h)

You can use a USB to serial interface connected to program the Atmega 1284p with Maniac bug bootloader

Best regards,
e-licktronic

Merci Bien!

yay! im no programmer but love the way people tend to work on things when theyre open soucred!

nice one

Thank you so much !!!

Are there any changes form the distributed OS 1.0 (the one i think everyone has installed) ?


Cheers

For everyone who has not done lot of Arduino work (like me) here's something you need to know.

https://github.com/maniacbug/mighty-1284p

Those hardware profiles do not work with the latest version of the Arduino IDE. Although the github -page says it's versions bigger than 1.0.

So grab a something like 1.0.5 from the http://arduino.cc/en/Main/OldSoftwareReleases

How do you update in MIDI ???

there's only .ino and .hex :/

thanks in advance

Hello.

I want to update the firmware via midi.
Where is 2.0 sysex file?
I can not find it.

regards,

e-licktronic wrote:Dear Diyer,

Here are the Yocto Arduino code and libraries.

Yocto_2_0.rar

Library.rar

You need to use Arduino IDE and change buffer length in Wire library to 128 (in the both file twi.h and wire.h)

You can use a USB to serial interface connected to program the Atmega 1284p with Maniac bug bootloader

Best regards,
e-licktronic

Thank you!

whats yocto 2.0 firmware for? i think my kit is with preburned 1.0c ..do i need to get a different chip and put this 2.0 on it? is it the latest firmware?