YOCTO² enclosures - official thread

Well guess what I picked up at the post office today?
That's right, my Yocto2 case. I had a letter from the post office posted to me on Friday stating I had a package to pick up!
To my surprise it was from Poland.
The box was all ripped up and broken and I feared the worst.
I was lucky, the case was fine. It actually looks very nice!!

Sadly though I can't be botherex to complete this project so I will be selling it with all components from Mouser - the complete kit except for the circuit boards and psu and knobs.

If anyone is interested send me a PM. I'm only selling within Europe.

It seems that Kacper sent all Nava and Yocto² enclosure. Look what i received this morning

So if you still get yours, be patient you will get it.
I still have not heard from Kacper. I hope you are fine guy

Any one here want to buy my Yocto2 enclosure and mouser component kit?

I got mine today, but it seems that the holes on the PCB don't line up with the standoffs. Is this a problem others have found? Some of the standoffs are out 2mm which, short of filing the board, I can't think how to fix.

-Rich

Mine match perfectly with PCB holes.

Try to bend this PCB header a little bit by user a long M3 screw.

Hello,
Got my Enclosure last week !

Thanks Kacper !

Hi in my enclosure two or three holes on the PCB don't line up with the standoffs and i used a small hammer

and now is ok

but easy with the hammer

holes for the 4 diodes on the top main board are to small i drill them with 3,5mm bit , space between main and power board is to small for the power jack and connectors , i desolder the power socker on the main board and solder to the small board and the wires to the main big board (opposite way like is in the instructions ) and now is ok

maybe you have the same problem ?

Little demo

Both my units arrived today. Kacper , thank you. And I hope everything is ok. Your work is excellent. Everyone should feel confident ordering cases from Kacper, maybe just dont be in a rush

[resize=700]https://farm5.staticflickr.com/4549/382 ... d9cc_c.jpg[/resize]

Are there still enclosures available from the first batch?

Virtualcrimes wrote:Are there still enclosures available from the first batch?

I am selling mine ..... can't be bothered to finish the project.