Heyho,
Just soldering the Noise Section.. Now i am at the point with the capacitors
Its about the C33 with the value of 18n
in the mouser bom there is only a pack (3x) 1,8n (0,0018uf)
The mouser nr is 647-QYX1H182KTP
So the BOM is wrong or do i miss something?
best!
sascha
Film-Capacitor in Noise Section
It's in the Mouser BOM, under quantity of 7.
Mouser No: 80-MMK5183J63J01L4
"Film Capacitors 63volts 0.018uF 5% LS 5mm"
C33 is 18n = 18nf 18nf is also displayed as 0.018uF.
Although the packaging is different the capacitor has the same depth (5mm) so should fit the space without any problems.
Mouser No: 80-MMK5183J63J01L4
"Film Capacitors 63volts 0.018uF 5% LS 5mm"
C33 is 18n = 18nf 18nf is also displayed as 0.018uF.
Although the packaging is different the capacitor has the same depth (5mm) so should fit the space without any problems.
THANKS! 
again...
so many bags... have to order them again!!
again...so many bags... have to order them again!!