Power supply
Ground to 5 Volt 4.963
Ground to 15 Volt 14,078v
Ground to -15volt 0 Volt. Why
https://pl.vc/1fffvw
https://pl.vc/1bnd68
Power supply no -15 Volt ground
Check IC5 if it is soldered properly and also check diode orientation as well. IC5 is a 7915 negative voltage regulator. Start with that.
The Diode orientation works alright like you can see on the board. And the Diodes are working like they Seouls. How can i check the ic5 or do I need a new one? Thanks for answering
Probably using a DC wall wart. You need one with an AC output.
Good point "ikke"
Sud76137 did you check your power supply is it 15V AC or is it 15v DC it should be AC.
Sud76137 did you check your power supply is it 15V AC or is it 15v DC it should be AC.
AS "ikke saidcso5 wrote:Good point "ikke"
Sud76137 did you check your power supply is it 15V AC or is it 15v DC it should be AC.
Süd76137 how did you go??
thank you very much for your support.cso5 wrote:Süd76137 how did you go??
i love you guys