Just started out with the first section.
C3 spec. 680 / 35 Volt
included in BOM 680 / 25 Volt... is this really OK?
C16, C18, C20 spec. 100uF/ 10V
included in BOM 100uF/ 6.3V. (8 qty included)
OK or error?
Latest BOM, Capacitor Voltage values differs?
-
Last edited by drifter7508 on Apr 19th, '16, 21:00, edited 1 time in total.
100uF/ 6.3V are Ok
the Power Supply part number C3 is electrolytuc capascitor 680/ 35 V on mouser bom what i order is 680 / 25 volts is this ok?
i ask the same question
Yes it is
Best regards,
e-licktronic
i ask the same question
dig in the forum you can find everything
Thanks for fast replies!
(I spent hours reading most threads)
(I spent hours reading most threads)
on the PCB c16-c18-c20 are not polar while the capacitors are. does it matter what the orientation is then?