Powerswitch mounting?
-
Best way to mount a powerswitch? The pcb is not prepared like the Nava is.
With an internal power supply you would be switching the line voltage, so the PCB doesn't matter.
If you use the power brick, I personally don't see the advantage of a switch. But there you could de-solder one leg of the 2.1mm power socket and solder some wires to the switch in between the pcb and the desoldered leg of the socket.
If you use the power brick, I personally don't see the advantage of a switch. But there you could de-solder one leg of the 2.1mm power socket and solder some wires to the switch in between the pcb and the desoldered leg of the socket.