am I too stupid to use my Yocto?

Discuss Yocto construction and related issues
  • Dear Nicolasstefan,

    Are you sure D1 to D8 diodes are in the right way ?

    Best regards,
    e-licktronic
    Best regards,
    e-licktronic
  • Hi there,

    i checked the diodes - all in right place and direction.
    Don´t know what it is but the machine is not doing what it should :(

    Any other ideas?
    Thanks for help!
    Nicolas
  • Dear Nicolas,

    Your problem appears to be a malfunction of rotary switch. check the R52 to R55 values and solders.
    Check if your CPU is firmly embedded.
    Maybe a picture of the circuit could help me to find a solution to solve your problem.

    Best regards,
    e-licktronic
    Best regards,
    e-licktronic
  • Hi There,

    I checked all parts of the sequencer section and found some parts that where not solder that good.
    Now it works! Thanks for your help!!!

    Now i realized that the cymbal is not playing - if we could fix that last problem toghether i would be MORE THAN HAPPY!!!
    I took some Pictures of the Cymbal part - may be you can have a look at it?
    Thanks
    Nicolas
  • Dear nicolasstefan,

    Post your picture here i will try to show what's the problem.

    Best regards,
    e-licktronic
    Best regards,
    e-licktronic