Hello guys!
Since the kit is back in stock (hell yeah!!! ), would it be possible to have a BOM update for this component in back-order? (and anything else people might have noticed since the last update)
http://www.mouser.ch/Search/ProductDeta ... LCT52R105J
Thanks a bunch!
Nava v1.0 BOM [5/18/16 IMPORTANT BOM UPDATE]
I ordered these LED Holders instead : http://www.mouser.be/ProductDetail/Biva ... vg13M0g%3d
Not tested yet, but they spec 1 mm less wide than the white ones...
Not tested yet, but they spec 1 mm less wide than the white ones...
Is this the same update?
EDIT 5/23/16
-20Kohm resistor quantity updated to 5pcs
EDIT 5/21/16
-20Kohm resistor quantity updated to 5 pcs
thanks
EDIT 5/23/16
-20Kohm resistor quantity updated to 5pcs
EDIT 5/21/16
-20Kohm resistor quantity updated to 5 pcs
thanks
Hi Vincent, Do you have the last update for the Nava v1.0 Mouser BOM ? I would like to buy the components...
Thanks
Regards
Cristo
Thanks
Regards
Cristo
There's only a bunch of resistors out of stock - pro tip: search for alternatives for each of those. Then there's the Polystyrene caps - if you're in Europe you can get those from Reichelt in Germany for instance. They might be called Styroflex there. Last up is a bunch of metric fasteners, those can be found everywhere unless you're in a non-metric holdout like the US.
Hi!
I found replacements for the styrene capacitors, but i got trouble finding 160kOhm 1/10W 0.1% resistors, do you know a place where I can find them? The specs seems a bit too critical for subbing it with resistors that has slightly different specs, but i may be wrong.
Thanks!
I found replacements for the styrene capacitors, but i got trouble finding 160kOhm 1/10W 0.1% resistors, do you know a place where I can find them? The specs seems a bit too critical for subbing it with resistors that has slightly different specs, but i may be wrong.
Thanks!
Reichelt to the rescue!
MPR 160K is the same thing.
Or, browse E-bay, Futurlec (slow-ish as they are in Thailand) or Tayda. Distrelec only has SMD resistors with that tolerance. Digi-Key in the US stocks suitable parts. RS and Rapidonline don't.
MPR 160K is the same thing.
Or, browse E-bay, Futurlec (slow-ish as they are in Thailand) or Tayda. Distrelec only has SMD resistors with that tolerance. Digi-Key in the US stocks suitable parts. RS and Rapidonline don't.
Thanks!!
I always forgot about reichelt (and you mentionned it in the post before, i have no excuses aha).
I always forgot about reichelt (and you mentionned it in the post before, i have no excuses aha).
Another mouser option 271-160k-RC for your resistors
http://www.mouser.com/ProductDetail/Xic ... 252bhUw%3d
They often have these in stock in 1/4 W size that the project uses.
5% (Most of the project) P/N: 291-(value)-RC
1% (RA#) P/N: 271-(value)-RC
For value
100 ohms = 100 or 291-100-RC
4.7k ohms = 4.7K or 291-4.7K-RC
2.2M ohms = 2.2M or 291-2.2M-RC
If you hit a value like 5k that don't come up, double check the PDF on one that does and make sure it's a part made in that line. That 5k can get substituted as the 4.99k part.
Hope that helps..
http://www.mouser.com/ProductDetail/Xic ... 252bhUw%3d
They often have these in stock in 1/4 W size that the project uses.
5% (Most of the project) P/N: 291-(value)-RC
1% (RA#) P/N: 271-(value)-RC
For value
100 ohms = 100 or 291-100-RC
4.7k ohms = 4.7K or 291-4.7K-RC
2.2M ohms = 2.2M or 291-2.2M-RC
If you hit a value like 5k that don't come up, double check the PDF on one that does and make sure it's a part made in that line. That 5k can get substituted as the 4.99k part.
Hope that helps..