No sound on Crash, Hanclap & Distorted hi-tom

Discuss Nava construction and related issues
  • User avatar
    e-licktronic Site Admin
    Posts 519
    Joined: Feb 16th, '11, 13:36

    jonnem wrote:
    Where do i start looking for errors?

    Vincent? ;)

    Regards/jonnem
    First check all power supply values on each section.
    Do you use jumper or 0 ohm resistor for the RP resistors ?

    Best regards,
    e-licktronic
    Best regards,
    e-licktronic
  • jonnem
    Posts 19
    Joined: Mar 17th, '14, 10:14

    e-licktronic wrote:
    jonnem wrote:
    Where do i start looking for errors?

    Vincent? ;)

    Regards/jonnem
    First check all power supply values on each section.
    Do you use jumper or 0 ohm resistor for the RP resistors ?

    Best regards,
    e-licktronic
    All power supply values are correct on all 3 instruments.

    Yes, i use 0 ohm resistors for the RPresistors on all instruments.

    This is what my hi-tom sounds like, and if you listen carefully you can hear it all the time even when its not triggered. I'm moving the pitchpot without triggering it in the the end of the soundexample.

    https://soundcloud.com/ennoi/hitom
  • jonnem
    Posts 19
    Joined: Mar 17th, '14, 10:14

    Vincent/e-licktronic on holiday?

    I could really use som help here... :cry:
  • User avatar
    Patrick
    Posts 61
    Joined: Jan 6th, '14, 19:16
    Location: Germany

    Take a scope and measure...
    Envelopes, vca, opamp in/outs
  • cso5
    Posts 30
    Joined: Jan 7th, '14, 21:13
    Location: Melbourne, Australia

    jonnem , how is your build going? Have you solved your problem yet?
    • Post Reply

    Return to “Nava Hardware”