Exploring other enclosure options.

Discuss Yocto construction and related issues
  • Don Solaris
    Posts 9
    Joined: Nov 23rd, '14, 16:08

    Thanks for heads up! I will try at Farnell.
  • seven
    Posts 37
    Joined: Jan 2nd, '14, 17:03

    ElSchtroumpf wrote:Due to continued demand, and because the production margins left me with less enclosures than I ordered, I decided to do one last small batch. Small as in less than 20 units.

    I'm still very busy with the current group buy so I won't be taking any orders, but if you're interested in getting a metal enclosure you can post it in this thread so I can get an idea of the demand.
    I would be interested in a metal enclosure, please PM me if/when available...thanks or I'll check back every now and then...
  • YannickD
    Posts 6
    Joined: Apr 1st, '15, 22:45

    ElSchtroumpf, I would be very interested in one of the metal cases.
  • ElSchtroumpf
    Posts 180
    Joined: Jan 11th, '14, 11:12

    For anyone still interested in a metal enclosure : I should get the second batch next week. Once all of them are shipped I will be able to sell about 20 pieces WITHOUT print for a very low price, probably somewhere in May. After this there will most likely be a third batch of enclosures.

    Keep an eye on this thread for news!
  • sramjunky
    Posts 1
    Joined: Apr 4th, '15, 20:25

    Has the Third batch of enclosures been order as of yet?
  • jooks
    Posts 8
    Joined: May 2nd, '14, 10:38
    Location: Sweden

    Im interested in another enclosure. Maybe also without the print.
  • syntheslalom
    Posts 2
    Joined: Mar 22nd, '15, 12:53

    w
    Last edited by syntheslalom on May 3rd, '15, 13:44, edited 1 time in total.
  • Ciarany
    Posts 16
    Joined: Mar 24th, '15, 21:28

    Put me down for a metal enclosure without print
  • Ciarany
    Posts 16
    Joined: Mar 24th, '15, 21:28

    Please put me down for a metal enclosure without print
    • Post Reply

    Return to “Yocto v1.0 Hardware”