Discuss Yocto construction and related issues
-
-
- Posts 20
- Joined: Feb 25th, '14, 09:50
Thank you for the PM ElSchtroumpf but i couldnt reply.
I will definitely take you up on the offer, and email you shortly.
One question tho, sorry again if a bit daft, if i buy the c18 connector and switch, do you also get the plastic blanking plates ? Ive not decided whether to go psu or wall wart yet? Or are they just bits of plastic, rather than specially made pieces?
I hope im not over thinking this!
FWIW, im now thinking a little side module with the mods on, with a multipole connector via the c14 connector blanking plate would be much neater. edit : perhaps you could even design one with the same form factor/design etc...
Many thanks, ben
-
- Posts 20
- Joined: Jan 8th, '15, 01:33
- Location: Stockholm
I've been meaning to get in on a Yocto for a while so I'm definately getting a metal case.
Please put me down for one
Cheers,
J
-
- Posts 180
- Joined: Jan 11th, '14, 11:12
I've been getting some questions regarding the blanking plates so I'll answer them here, since I don't have my mailing list set up yet.
If you buy the switch but not the C14 connector, you will receive a blanking plate for the C14 hole with e-licktronic logo
If you buy both the switch and C14 connector, you will get a blanking plate for the hole of the 15 VAC input, which has to be glued in place
If you take neither switch nor C14 connector you will get the C14 hole blanking plate, to be screwed in place, and the blanking plate for the switch hole to be glued in place
A popular option is to buy the switch and C14 connector, and to also order the blanking plate for the C14 hole. This way you can use your yocto with an external PSU and install an internal PSU later on.
-
- Posts 1
- Joined: Jan 8th, '15, 21:40
hey ElSchtroumpf!
I'm interested in purchasing a case so put me down for one as well. (it doesn't appear that I'm able to send PMs)
Thanks!!
-
- Posts 180
- Joined: Jan 11th, '14, 11:12
I have decided to do a 60 unit batch, which means right now I have only 4 enclosures left!
-
- Posts 4
- Joined: Jan 9th, '15, 17:50
I want one please (but can not pm...) ! thanks !
(I'll install both the switch and C14 connector)
-
- Posts 1
- Joined: Jan 10th, '15, 21:41
I will take one please with switch and c14 many thanks!
-
- Posts 180
- Joined: Jan 11th, '14, 11:12
I now have orders for 60 enclosures, so the group buy is now closed. But check this page in the weeks to come, there might be a cancellation or two.
-
- Posts 3
- Joined: Jan 6th, '14, 20:53
I'm IN for one or two enclosure if you have some left... but can't PM you !

-
- Posts 21
- Joined: Jan 2nd, '14, 15:23
If someone cancel his order, I'm up to take his place too
Thank you