What are the wire sizes for Molex connectors and Power

  • I used 2 shielded 2 wire speakercables, found it somewhere else on the forum.

    I'm struggling right now figuring the correct orientation for the smd ic's. On my board it's not indicated.. as far as I can tell

    Here is a picture of the cable https://www.okaphone.nl/product/images/MC-102.jpg
  • Hi Motjee,

    Look at this thread:viewtopic.php?f=24&t=1165
  • motjee wrote:I used 2 shielded 2 wire speakercables, found it somewhere else on the forum.

    I'm struggling right now figuring the correct orientation for the smd ic's. On my board it's not indicated.. as far as I can tell

    Here is a picture of the cable https://www.okaphone.nl/product/images/MC-102.jpg
    There is a picture of the proper orientation forthe SMD ICs in the PDF Build guide for the Yocto2, page 20.
  • motjee wrote: Oct 13th, '19, 12:46 I used 2 shielded 2 wire speakercables, found it somewhere else on the forum.

    I'm struggling right now figuring the correct orientation for the smd ic's. On my board it's not indicated.. as far as I can tell

    Here is a picture of the cable https://www.okaphone.nl/product/images/MC-102.jpg penalty kick online
    Check out this guide.