Testing each sounds as I build

Discuss Yocto construction and related issues
  • There's a bit of info around here on this. You also have to send 5V to the accent input. You can find which resistor to connect to on the schematic.

    I initially tried with my Eurorack, but ultimately ended up using an Arduino since that was easier to make a more exact trigger.
  • Hey Woody

    Thanks for the info.

    For those interested the thread with the info on testing sounds as you build is:

    viewtopic.php?f=16&t=179

    Happy building.
  • hey guys

    so i made it as far as the cowbell and all is good so far

    I want to test the cowbell but notice on the schematic that there are 2 trigger points rather than the normal one:

    one trig going to R14 and another one going to R19 & 18.

    Do i need to send a trig to all 3 resistors to hear a sound?

    slightly confused.

    I should point out that I have the cymbal built (which i need to hear the cowbell)

    Thanks again.