SquareSeq vX.0 by e-licktronic

Here we talk about e-licktronic projects (hardware, software) like SquareSeq, Ablickton...

SquareSeq vX.0 by e-licktronic

Postby e-licktronic » Feb 27th, '13, 09:05

Image
SquareSeq is a drum sequencer based on the ergonomic TR 606 sequencer.
A complete description is available here

Best regards,
e-licktronic
User avatar
e-licktronic
Site Admin
 
Posts: 552
Joined: Feb 16th, '11, 13:36

Re: SquareSeq vX.0 by e-licktronic

Postby johnevan51 » Feb 5th, '14, 00:03

I have just purchased the SquareSeq. While most functions appear to work correctly, all the LEDs on all 3 boards stay on permanently. How can this be rectified?

Additionally, are there any more comprehensive instructions for using it?

Thanks
John
johnevan51
 
Posts: 2
Joined: Feb 4th, '14, 23:55

Re: SquareSeq vX.0 by e-licktronic

Postby e-licktronic » Feb 5th, '14, 06:04

Dear johnevan51,

Please could you check Lickogic connection. Are you sure you connect OUT to IN.

Best regards,
e-licktronic
Best regards,
e-licktronic
User avatar
e-licktronic
Site Admin
 
Posts: 552
Joined: Feb 16th, '11, 13:36

Re: SquareSeq vX.0 by e-licktronic

Postby johnevan51 » Feb 5th, '14, 07:13

Yes, I have the correct OUT-IN connection with the cables. The FUNCTION buttons on Dilicktal board 1 are producing the correct responses on the LCD, and the buttons on Dilicktal boards 2 and 3 are also producing the correct inputs on the LCD. I can run through all the menus on the LCD. Given that the buttons are all working, I must have it connected correctly! However, all the LEDs remain on permanently.
johnevan51
 
Posts: 2
Joined: Feb 4th, '14, 23:55

Re: SquareSeq vX.0 by e-licktronic

Postby e-licktronic » Feb 5th, '14, 10:03

Can you try to switch cablick16 maybe you 've got a faulty cable

Best regards,
e-licktronic
Best regards,
e-licktronic
User avatar
e-licktronic
Site Admin
 
Posts: 552
Joined: Feb 16th, '11, 13:36

Re: SquareSeq vX.0 by e-licktronic

Postby taeubler » Feb 18th, '14, 11:58

I made a simple case for the Sequencer... just attached the EPS File for Lasercutting the Case.
Material schould be 3mm thick, and screws are all M3 10mm.

Just went back from Lasercutting the prototype and it worked. - Due to Problems with the PPI (Coreldraw uses 96ppi, inkscape 90) - I had some Size related troubles... Verify the size of the objects ! It should be : 176mm x 76mm x 186mm (Outer Dimension)

have fun :-)
Attachments
caseplans_20140215_96ppi.eps.zip
A simple Case for the Sequencer. 96ppi EPS Format.
(9.27 KiB) Downloaded 246 times
taeubler
 
Posts: 1
Joined: Feb 18th, '14, 11:51

Re: SquareSeq vX.0 by e-licktronic

Postby tiz » Feb 26th, '14, 20:24

this sequencer can work with the mb 9090 tr 909 clone?
tiz
 
Posts: 8
Joined: Feb 23rd, '14, 23:16

Re: SquareSeq vX.0 by e-licktronic

Postby e-licktronic » Feb 27th, '14, 04:02

Dear Tiz,

Of course it could work with any analog drum module with some adds.

Best regards,
e-licktronic
Best regards,
e-licktronic
User avatar
e-licktronic
Site Admin
 
Posts: 552
Joined: Feb 16th, '11, 13:36

Re: SquareSeq vX.0 by e-licktronic

Postby soulomon » Apr 1st, '14, 10:02

Hi,
I've just received my SquareSeq, but I'm having the same all-led-lit problem previously stated here.

Hardware assembly should be ok as both Midilickuino and Dilicktal test sketches work correctly.
SquareSeq shows correct info on the LCD and buttons work as they should, but the leds are all lit.

Would be possible to have an updated SquareSeq firmware using the latest SRIO lib, as used in the Ablickton?
Thank you.

Regards,
Soulomon
soulomon
 
Posts: 5
Joined: Mar 14th, '14, 16:56

Re: SquareSeq vX.0 by e-licktronic

Postby e-licktronic » Apr 1st, '14, 19:55

Dear soulomon,

I just tried SquareSeq v1.1 without any problem.
What kind of Arduino board do you use ? Duemilanova, Uno... ?
What's your Arduino version ?
Are you sure that Dilicktals are connected in the right way ? IN to OUT.

Best regards,
e-licktronic
Best regards,
e-licktronic
User avatar
e-licktronic
Site Admin
 
Posts: 552
Joined: Feb 16th, '11, 13:36

Next

Return to Projects

Who is online

Users browsing this forum: No registered users and 2 guests