BA662 instead of a BA 6110

Discuss mods, hacks, tweaks, etc.
  • Jakob Feingold wrote:Hi Monsieur Schtroumpf (or Schlumpf as they are called here in Germany) trust you, when you say the BA6110 is the next best thing, but if I were to get my hands on a BA662 (ora clone, as there are some out there) would it be possible to just build in the "original" or are there any problems concerning the form factor or circuitry?
    Thanks in advance Felix/Jakob
    hi Jakob,

    probably you can also use a BA662 but the 662a and 6110 have a different pin out.
    check the datasheets to compare the chips.
    maybe you want to check this: http://www.subatomicglue.com/x0xl0g/ba662a-analysis

    best,
    Sub
  • Thank you very much for your answer and the link. Will check it our. All the best
  • http://wiki.openmusiclabs.com/wiki/x0xb0x
    Don't know if this is functional for this project, but there is a reversed enginered BA662 as used in a TB-303.

    Looked a little further;

    https://www.muffwiggler.com/forum/viewt ... c&start=50

    https://oshpark.com/shared_projects/QCnNP4oK

    And a Facebook page :)

    https://www.facebook.com/BA662-clone-826416797440804/
  • Maarten wrote:http://wiki.openmusiclabs.com/wiki/x0xb0x
    Don't know if this is functional for this project, but there is a reversed enginered BA662 as used in a TB-303.

    Looked a little further;

    https://www.muffwiggler.com/forum/viewt ... c&start=50

    https://oshpark.com/shared_projects/QCnNP4oK

    And a Facebook page :)

    https://www.facebook.com/BA662-clone-826416797440804/
    the open music labs clone works well in the re303, I've also used it to repair an mc202.