Hi, without the nava main board plugged in, I’m not getting -15v from power supply. im getting 0v
On the +5 rail I’m getting +5 But on the +15 rail I’m only getting +13v. Is it possible my voltage regulators are bad?
No Negative Power Rail
-
e-licktronic Site Admin - Posts 519
- Joined: Feb 16th, '11, 13:36
Sometime to get negativ rail working you may have a charge on it. Put a 1K resistor between GND and -15V and check agin
Best regards,
e-licktronic
e-licktronic