MUX_SH board mod tutorial

Discuss Nava construction and related issues
  • Im very sorry to ask but is there a BOM for the components I need to buy? or a list of the stuff in order to solder ti the mux board?
  • Check the specs tab on the shop for that product.
  • Has anyone made a mouser cart for this? :)
    Last edited by hofmann25 on May 22nd, '18, 03:13, edited 1 time in total.
  • Ok so I've made a mouser cart for these Mux Boards.

    Can someone who has built these and successfully done this mod check this cart and correct me if I'm wrong? :ugeek:

    https://www.mouser.com/ProjectManager/P ... 83975da3f7

    Cheers :)
  • hofmann25 wrote:Ok so I've made a mouser cart for these Mux Boards.

    Can someone who has built these and successfully done this mod check this cart and correct me if I'm wrong? :ugeek:

    https://www.mouser.com/ProjectManager/P ... 83975da3f7

    Cheers :)
    Looks fine mate, though you've doubled up on the 4051's?
  • druu wrote:
    hofmann25 wrote:Ok so I've made a mouser cart for these Mux Boards.

    Can someone who has built these and successfully done this mod check this cart and correct me if I'm wrong? :ugeek:

    https://www.mouser.com/ProjectManager/P ... 83975da3f7

    Cheers :)
    Looks fine mate, though you've doubled up on the 4051's?
    Thanks druu!

    Which one. This?

    https://au.mouser.com/ProductDetail/511-HCF4051YM013TR
    OR
    https://au.mouser.com/ProductDetail/595-SN74LV4051AD

    Cheers
  • I’d go for the ST. :)
  • Can this be added to a v1.01a board while building, instead of modifying afterwards? That way nothing needs desoldering?
  • TL074CDT from mouser, no point or nick indicating polarity ... :x does anyone know the orientation?


    Image