Page 15 of 20

Re: Unoffical Firmware Available

Posted: Jan 28th, '20, 14:02
by FlavioB
Masuto wrote:Amazing! Will try tonight!!! HUGE THANK YOU!!!
Dai che รจ facile! ;-)
F.

Re: Unoffical Firmware Available

Posted: Jan 29th, '20, 21:57
by rv0
The basics of my new firmware version are starting to work out..
This is a major refactor/rework/rewrite of the code, so everything needs to be revised :? But the result will should be way tighter, simpler and easier to maintain.

Currently I have pattern play mode working as before. And it's tight (ok, maybe I'm biased, I need to record some before/after to make that statement hard).

Next up is getting the edit mode to work again.. It _almost_ works, but I could not finish it (sleep is important ;)). Edit: with this rework the tap mode will work a lot better, no more missing/double triggers!

Then it's roll mode.. The idea is to allow much lower roll resolutions, but also allow "shifting" the roll back and forth (e.g. 1-5-9-13 to 3-7-11-15).. I have some ideas how to do that, the challenge will be the visual representation.

After that well.. apart from fixing the track modes _again_... I'm thinking about a new feature: I've been looking at 808 vids on youtube that use the FILL IN.. and also I've recently acquired a Cyclone TT-78, which has FILL IN functionality. and i like it.. you play a pattern, press fill in, then after the pattern it will play the fill-in pattern, and return to the pattern afterwards.. It's brilliant for live performance (where you need your hands and dont want to "wait" till the fill in pattern starts to switch back manually). From experience I can tell this usually ends up with the fill-in pattern playing more than once, ruining performance.
- On the 808: the last 4 patterns can be used as fill in patterns, the fill in is triggered by pressing the Tap/Fill-in button (which happens to be shift on the Yocto)
- On the Cyclone: every pattern has a unique fill in pattern "behind it". Fill-in is triggered by a dedicated fill-in button

The problem:
We don't have a dedicated fill-in button. in fact we have a severe lack of buttons. The yocto's shift button happens to be an important button with a different function on the 808 (tap & fill-in). On the yocto shift is used mostly to switch banks, and with the unofficial firmware in Edit mode we can use it for tap entry.
So a fill-in that works exactly like the 808 is impossible without changing the way banks are switched.. And I don't have any suggestion for that.
Doing something similar like the TT-78 is also an option: there's tons of available memory, so every pattern can easily have an individual fill-in pattern.. But the problem remain.. how to activate it.
One possible idea is add "order of pressing" logic.. If you press a pattern slot, and then shift, it will play the fill in of that slot. If you press shift, and then the pattern slot, it will switch banks.. Dunno how workable this is, but it's the best I can come up with at the moment.

Re: Unoffical Firmware Available

Posted: Jan 29th, '20, 22:07
by FlavioB
Amazing news and work, rv0! Thanks for this!

Let us know if you need some "beta testers"... and of course I think that somebody will add his or her ideas/comments about how to solve the pattern fill-in selection method ;-)

Again - thanks!
F.

Re: Unoffical Firmware Available

Posted: Feb 2nd, '20, 03:08
by helectromagneticus
rv0, I like where your head is at with this! I don't have any brilliant ideas for the fill-in problem. I don't use my Yocto live, so it's also not a big deal for me to switch between patterns manually to emulate the 808's fill function.

It's worth noting that the unused third trigger pin on the ATMEGA could be repurposed as an input...

Re: Unoffical Firmware Available

Posted: Feb 2nd, '20, 13:40
by rv0
helectromagneticus wrote: It's worth noting that the unused third trigger pin on the ATMEGA could be repurposed as an input...
I'm already using that one.. Also think Cocteau mods are using it. Can't expect people to drill holes in the case for a feature like that

Re: Unoffical Firmware Available

Posted: Feb 3rd, '20, 10:12
by kumarip
Good information.

Re: Unoffical Firmware Available

Posted: Feb 17th, '20, 13:25
by Masuto
rv0 wrote:If you get stuck people will help you, don't worry!
AAAAND... no it's not working LOL i told you guys i am very unlucky with these things.
I followed your instructions to a tee. downloaded E6, set config and all. I tried a delay of 200, 300 and turbo set to none or 1x
-i put YOCTO in PATTERN PLAY MODE,
-i press on and 1-2-5. All leds blink twice.
-i am quickly sending the .syx out of my MIDIMAN (cant get more basic than that).
NO LED play. All leds are off.
When the send bar is through, after half a minute YOCTO shows the blinking first pattern light. THATS IT.
To check features, i tried to edit a pattern using tap (shift) and it's not working :(
i tried also using midiox, 300 delay.. no avail.

Re: Unoffical Firmware Available

Posted: Feb 17th, '20, 14:57
by rv0
Masuto wrote:
rv0 wrote:If you get stuck people will help you, don't worry!
AAAAND... no it's not working LOL i told you guys i am very unlucky with these things.
I followed your instructions to a tee. downloaded E6, set config and all. I tried a delay of 200, 300 and turbo set to none or 1x
-i put YOCTO in PATTERN PLAY MODE,
-i press on and 1-2-5. All leds blink twice.
-i am quickly sending the .syx out of my MIDIMAN (cant get more basic than that).
NO LED play. All leds are off.
When the send bar is through, after half a minute YOCTO shows the blinking first pattern light. THATS IT.
To check features, i tried to edit a pattern using tap (shift) and it's not working :(
i tried also using midiox, 300 delay.. no avail.
Haha don't worry, some tips to help you:
- does not matter which mode yocto is in, as long as it's off when you start
- set delay to 16.. 200 is probably a verrrrry long delay
- Not 1-2-5 but 1-3-5

Re: Unoffical Firmware Available

Posted: Feb 18th, '20, 12:34
by Masuto
rv0 wrote: - does not matter which mode yocto is in, as long as it's off when you start
- set delay to 16.. 200 is probably a verrrrry long delay
- Not 1-2-5 but 1-3-5
Sorry to sound retarded but:
Ahem yes i tried delay 16 too before switching to 200, 300.. aaaand nothing
And (it was a typo) yes i am pressing 1-3-5.
Should i question the 138 optocoupler ic at the midi in?
I tried many times before to update in the past but always unsuccessfully tbh

Re: Unoffical Firmware Available

Posted: Feb 19th, '20, 08:02
by rv0
If your midi in normally works (clock, expander mode) the opto should be fine