Yocto EXPANDER mode problem

Discuss use it and firmware update
  • Hi Kacper, I've tried it with a Roland SPD-8. Everything works properly: latency, velocity. It could be a problem with the interpretation of the velocity with your controller. Try it with another instrument...
  • I think there is for sure problem with Yocto because on other instruments this works OK. Even with velocity on 1 Yocto is louder in Expander mode.
  • Is your accent level up? I've noticed when using my MPC to control the Yocto in expander mode that the accent is what controls the velocity sensitivity, and if it is up all the way and if you are sending max velocity signals, everything will be louder because it's got full accent on every note.
  • I noticed that but accent knob is set on 0 and Expander mode is still louder than normal mode.