DinSync issues

Discuss use it and firmware update

DinSync issues

Postby FlavioB » Jan 30th, '23, 15:27

Hi all.
I'm running firmware version 1.2c (I guess - I don't remember when I updated it, so if you can help me identifying it...).
My setup is as follows:
Ableton Live is clock master. It is sending the audio trigger via the appropriate VST plug-in to my E-RM Multiclock. From there, I send DinSync to the Yocto.
So, when I start Ableton Live and the clock starts, the Yocto starts in sync only the very first time. Afterwards, when I stop Ableton and start it again, the Yocto simply continues from where it stopped (it doesn't start from step 1). The only way to have my Yocto start in sync again, is to switch from "DinSync" to "Play" and then back to "DinSync".
To add some more weirdness: if the E-RM Multiclock is using its internal clock, I do not have any issues at all!
To me, it seems that for some reason the Multiclock is not sending a RESET signal when using external clock. But this somehow clashes with the fact that the TR-606, when fed from the Multiclock with external (Ableton Live) clock, is obeying flawlessly (it starts always from step 1).

What do you think is the issue here? I've already asked E-RM for support, but lastly they told me that they were never able to test with a Yocto unit, as they did not get any in their hands.

Any help will be appreciated - thanks!
F.
FlavioB
 
Posts: 246
Joined: Aug 16th, '15, 19:51

Re: DinSync issues

Postby FlavioB » May 1st, '23, 17:21

Anybody have any clues here? Vincent???
FlavioB
 
Posts: 246
Joined: Aug 16th, '15, 19:51

Re: DinSync issues

Postby rv0 » May 23rd, '23, 18:40

does the problem happen with Midi?

the ERM is does some things I don't like, but I forgot what those things were
Get the latest unofficial Yocto V1 firmware here.
Be sure to check the revised manual.
Leave your comments in this thread.
User avatar
rv0
 
Posts: 187
Joined: Feb 11th, '14, 09:09

Re: DinSync issues

Postby FlavioB » May 24th, '23, 10:45

rv0 wrote:does the problem happen with Midi?

No.
the ERM is does some things I don't like, but I forgot what those things were

If you can remember somewhen, please let us know.

As I was also having glitches in the sync, I changed my setup as follows:
Ableton Live --> Expert Sleeper's USAMO (with its dedicated plugin) --> Multiclock.
With this setup I do not experience any glitches in the sync (whereas they happen if I remove the USAMO from the chain and feed Ableton Live directly into Multiclock).
What I'm going to do, now that I am back on this topic again, is to test what happens with the USAMO/Multiclock chain and DinSync from the latter to the Yocto. I'll report back.
F.
FlavioB
 
Posts: 246
Joined: Aug 16th, '15, 19:51


Return to Yocto v1.0 Software

Who is online

Users browsing this forum: No registered users and 1 guest

cron