Unoffical Firmware Available

Discuss use it and firmware update

Re: Unoffical Firmware Available

Postby rv0 » Jun 1st, '20, 12:06

FlavioB wrote:Hi all!
I hope you're all safe and sound!

I just wanted quickly to get some feedback/update on the following:

SysEx dump for all patterns
Roll resolutions (lower than 16th notes and also eventually "moved" them down to the step buttons, instead of the potentiometer)

- Sysex dump has been part of the firmware since Version 1.1a, 1st of March 2019, see manual
- Roll resolutions require a bigger rewrite, which is work in progress in my repo unless someone manages to hack it sooner into the current firmware
Get the latest unofficial Yocto V1 firmware here.
Be sure to check the revised manual.
Leave your comments in this thread.
User avatar
rv0
 
Posts: 182
Joined: Feb 11th, '14, 09:09

Re: Unoffical Firmware Available

Postby FlavioB » Jun 2nd, '20, 12:35

rv0 wrote:- Sysex dump has been part of the firmware since Version 1.1a, 1st of March 2019, see manual
- Roll resolutions require a bigger rewrite, which is work in progress in my repo unless someone manages to hack it sooner into the current firmware


Thanks for the update.
If you need some beta-testing on the roll resolutions, just hit me with a PM :-)
F.
FlavioB
 
Posts: 180
Joined: Aug 16th, '15, 19:51

Re: Unoffical Firmware Available

Postby rv0 » Aug 14th, '20, 18:21

A little gift:

As my friend wants to sequence his TR-9090 rack from the Yocto, I adapted the current firmware to send MIDI out.
The latest "unofficial firmware" release (Version 1.2c from github) was used for this.

You can download the adapted version here: yocto_firmwareware_1_2_c_TR9090.syx
Midi out used standard midi drum mapping on channel 10. Except the last 4 (T1..3, NC), these are mapped to respectively channels 1234 for Volca Sample.
Roll is supported as well.



As for my other work involving the Yocto firmware: no news yet, been on hold for quite a while now.
Get the latest unofficial Yocto V1 firmware here.
Be sure to check the revised manual.
Leave your comments in this thread.
User avatar
rv0
 
Posts: 182
Joined: Feb 11th, '14, 09:09

Previous

Return to Yocto v1.0 Software

Who is online

Users browsing this forum: No registered users and 1 guest

cron