tom playing 16th problem
Posted: Aug 17th, '15, 20:54
last Saturday at a gig, Yocto started to play the MT on 16th through, even though I hadn't programmed anything, and the lights on the part were all off.
It's the same problem I had at first when I assembled the machine (cf. this thread: viewtopic.php?f=16&t=212&p=1086)
So naturally I was going to pull the Yocto apart to check the integrity of Q56 and Q57 as advised by Vincent today.
But when I turned it on again, everything worked as it should.
What is this? What could be causing this problem during the gig? unstable power? I had trig 1 and 2 connected to my modular, any way this could have influenced it?
it's a bit unsettling, nothing is worse than a randomly unstable machine in a live situation...!
so any help, hints, pointers, questions very welcomed!
It's the same problem I had at first when I assembled the machine (cf. this thread: viewtopic.php?f=16&t=212&p=1086)
So naturally I was going to pull the Yocto apart to check the integrity of Q56 and Q57 as advised by Vincent today.
But when I turned it on again, everything worked as it should.
What is this? What could be causing this problem during the gig? unstable power? I had trig 1 and 2 connected to my modular, any way this could have influenced it?
it's a bit unsettling, nothing is worse than a randomly unstable machine in a live situation...!
so any help, hints, pointers, questions very welcomed!